Trim Molding, Audi S5

Trim Molding, Audi S5

Removing






Proceed as follows:

- Remove the lower section of the bumper cover. Refer to => [ Bumper Cover Lower Section ] Bumper Cover Lower Section.

- Remove the bolts - arrows -.

- Remove the trim molding - 1 - forward from lower section of the bumper cover - 2 -.

Installing

• For the correct tightening specifications, refer to => [ Bumper Cover Overview ] Bumper Cover Overview.

Install in reverse order of removal. Note the following:

- Install the lower section of the bumper cover. Refer to => [ Bumper Cover Lower Section ] Bumper Cover Lower Section.