Fender End Plate

Fender End Plate






1 Fender

2 End Plate

- Remove front wheel.

- Remove the rear section from the wheel housing liner, refer to => [ Front Wheel Housing Liner ] Front Wheel Housing Liner.

• Loosen the windshield washer fluid reservoir on the left side.

- Remove the bolts - 3 -, unclip from the fender rear bracket => [ (Item 6) Rear Bracket ] Fenders and slide the end plate down and out.

3 Screws

• 1.5 Nm

4 Clip

• Quantity: 2