Module Carrier With Air Cushions For Lumbar Support Component Assignment

Module Carrier with Air Cushions for Lumbar Support Component Assignment






1 Connector

• For driver's lumbar support pump (V152)

• For front passenger's lumbar support pump (V153)

2 Connector

• For driver's lumbar support pressure switch (F224)

• For front passenger's lumbar support pressure switch (F225)

3 Hard Foam Block

• For pneumatic components

• Removing and installing, refer to => [ Module Carrier with Air Cushions for Lumbar Support ] Module Carrier With Air Cushions For Lumbar Support

4 Module Carrier With Air Cushions For Lumbar Support

• Secured to hard foam block - 3 - using plastic plug

• To remove, remove backrest cushion. Refer to => [ Bucket Seat Backrest Cover and Padding Overview ] Bucket Seat Backrest Cover and Padding Overview

• Pry off plastic plug using pry lever - Rmv outside mirror (80-200)

5 Lumbar Support Adjustment Switch

• Driver lumbar support adjustment pressure switch (F224)

• Front passenger lumbar support adjustment pressure switch (F225)

• To remove, remove backrest cushion. Refer to => [ Bucket Seat Backrest Cover and Padding Overview ] Bucket Seat Backrest Cover and Padding Overview

6 Y-Connector

• For pneumatic hoses to valve blocks

7 Lumbar Support Valve Block

• Driver lumbar support adjustment valve block (N209)

• Front passenger lumbar support adjustment valve block (N210)

• To remove, remove backrest cushion. Refer to => [ Bucket Seat Backrest Cover and Padding Overview ] Bucket Seat Backrest Cover and Padding Overview

8 Backrest Inflation Adjustment Valve Block

• Driver seat/backrest inflation adjustment valve block (V378)

• Front passenger seat/backrest inflation adjustment valve block (V379)

• To remove, remove backrest cushion. Refer to => [ Bucket Seat Backrest Cover and Padding Overview ] Bucket Seat Backrest Cover and Padding Overview

9 Lumbar Support Pump

• Driver lumbar support adjustment pump (V152)

• Front passenger lumbar support adjustment pump (V153)

• To remove, remove backrest cushion. Refer to => [ Bucket Seat Backrest Cover and Padding Overview ] Bucket Seat Backrest Cover and Padding Overview

• Secured using rubber strap - 11 - and plastic plugs - 10 -

10 Plastic Plug

• Pry off using pry lever - Rmv outside mirror (80-200)

11 Rubber Strap