Trim, Tunnel Side

Trim, Tunnel Side

Removing






- Remove the bucket seat. Refer to => [ Front Bucket Seat ] Front Bucket Seat.

- Secure the bucket front seat on the fixture for seat repair (VAS 6136). Refer to => [ Front Seat, Installing on the ] Front Seat, Installing on the Fixture For Seat Repair (VAS 6136).

- Remove the right backrest cover. Refer to => [ Backrest Cover ] Backrest Cover.

- Remove the belt latch. Refer to => [ Front Belt Latch ] Front Belt Latch.

• Do not disconnect the electrical harness connectors.

- Press the locking pin inward and remove the expanding clip - 1 -.

- Release clip - 3 - - arrow A - and remove trim - 2 - on the tunnel side upward and toward the front - arrow B -.

Installing

Install in reverse order of removal. Note the following:

- Make sure the trim on the tunnel side engages correctly in the backrest.