Bench Seat With Center Storage Compartment, Cover and Padding

Bench Seat with Center Storage Compartment, Cover and Padding

Special tools, testers and auxiliary items required

• Trim Removal Wedge (3409)

Removing






- Remove the seat bench. Refer to => [ Bench Seat ] Bench Seat.

- Disengage the rear and side molding - 2 - from the channel - arrow - in the center storage compartment - 1 -.

- Disengage the molding - 1 - all around the seat frame - 2 -.






- Remove the cover with upholstery - 3 - and - 4 - from the seat frame - 2 -.

Installing

Install in reverse order of removal. Note the following:

- When engaging the cover in the center storage compartment channel, begin at the center of the rear.

- Align the cover molding to the center storage compartment and then clip the cover into the center storage compartment channel.

- Do the same on the other sides of the cover.

- Make sure the covers are secured on the center storage compartment without wrinkles.