Fastener Tightening Specifications - Final Drive, Differential

Fastener Tightening Specifications






Front Final Drive Cover - Tightening Specifications and Sequence

- Pretighten the bolts - 1 - and - 2 - to 3 Nm.






- Tighten the bolts to 23 Nm in the following sequence: - 1 through 11 -.

Center Differential Housing - Tightening Specification and Sequence

- Tighten the center differential housing bolts in three steps as follows:

- 1. Pretighten the bolts - 1 - and - 2 - to 3 Nm.






- 2. Tighten the bolts to 8 Nm in the following sequence: - 1 to 6 -.

- 3. Tighten the bolt in the following sequence: - 1 through 6 - plus 90° additional turn.