Four-Way Lumbar Support Assembly Overview

Power Front Memory Seats, S6

Versions for specific countries: vehicles from 08/06

• Modular wiring routing came into effect with series production of seats.

• Check version of front seat and of vehicle and perform repairs accordingly.

• Note the two possible versions of the modular wiring routing, Modular Light or Modular => [ Modular Wiring Routing Versions ] Standard Front Seats Overview.


Four-Way Lumbar Support Assembly Overview

• The cover with upholstery in the backrest is not shown for clarity purposes.





1 Four-way lumbar support

• Removing and Installing => [ Four-Way Lumbar Support ] Power Front Memory Seats, S6

2 Driver Seat Lumbar Support Curvature Adjustment Motor (V125) or Front Passenger's Seat Lumbar Support Curvature Adjustment Motor (V126)

• Removing and Installing => [ Lumbar Support Curvature Adjustment Motors ] Power Front Memory Seats, S6

3 Clip

• For release cable guide => [ (Item 4) Release ]

4 Release

• For adjusting lumbar support

• can only be replaced with Driver Seat Lumbar Support Height Adjustment Motor (V129) or Front passenger Seat Lumbar Support Height Adjustment Motor (V130)

5 Driver Seat Lumbar Support Height Adjustment Motor (V129) or Front passenger Seat Lumbar Support Height Adjustment Motor (V130)

• Removing and Installing => [ Lumbar Support Height Adjustment Motors ] Power Front Memory Seats, S6

6 Backrest frame

7 Rivet

• Rivet using special pop rivet pliers (V.A.G 1753A)

• Before riveting, a plastic washer must be placed between lumbar support and backrest frame => [ (Item 10) Plastic washer ]

8 Release

• For adjusting lumbar support

• Can only be replaced with Driver Seat Lumbar Support Curvature Adjustment Motor (V125) or Front Passenger's Seat Lumbar Support Curvature Adjustment Motor (V126)

9 Clip

10 Plastic washer

• Between four-way lumbar support and backrest frame

11 Retaining plate

12 Retainer

13 Cable tie