Diagram 69/9 (Tracks 99-112)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Camshaft Position (CMP) Sensor, Knock Sensors (KS)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G40 - Camshaft Position (CMP) Sensor 5.2L BXA Overviews

G61 - Knock Sensor (KS) 1 5.2L BXA Overviews

G66 - Knock Sensor (KS) 2 5.2L BXA Overviews

G300 - Camshaft Position (CMP) Sensor 3 5.2L BXA Overviews

J623 - Engine Control Module (ECM) Overview of Control Modules

T3l - 3-Pin Connector, grey, on knock sensor 2

T3y - 3-Pin Connector, orange, on knock sensor 1

T60a - 60-Pin Connector, black (Connector A), on engine control module (ECM)

(200) - Ground Connection (shielding) (in engine compartment wiring harness)

(D141) - Connection (5V) (in engine pre-wiring wiring harness)

Previous Diagram 69/8 (Tracks 85-98)

Next Diagram 69/10 (Tracks 113-126)