Rear Parking Aid Sensors

Parking Aid

Observe notes on contact corrosion. Refer to => [ Contact Corrosion ] Service Precautions.

Rear Parking Aid Sensors





• Component location: In the bumper cover at - arrows -.

• Bumper cover removed for illustration purposes.

• Senders can be taken out without removing rear bumper.

Removing





- Switch off ignition and remove ignition key.

- Remove screws - arrows -.

- Reach behind bumper cover.

- Disconnect electrical harness connector - 1 - at sensor.





- Press both catches - arrows - to the side and press the sensor inward from the outside.

Installing

Install in reverse order.