Telematics Control Module, Initializing

Telematics Control Module, Initializing

The initialization must be done the first time it is operated before delivering to the customer.

During initialization, there is a data exchange between the Telematics control module and the service center.

Before initialization, the activation fax response must be received and the SIM card must be released.

Requirements:

• Sufficient reception

• Reception from at least 4 GPS satellites

• No 2nd mobile phone card in the cradle.

- Switch receiver on.

The "Service mode" display appears.

- Press the menu button until the "Security code" display appears.

- Enter security code (always "12345") using the number field and confirm entry with OK button.

• The security code should be saved.

- Now enter Telematics center number: "49 172 227 022 0"

and confirm entry with OK button.

- Enter Telematics provider number: "2002"

and confirm entry with OK button.

The initialization now takes place (approximately 3 to 6 minutes).

Then the "New vehicle - receive data" display appears.

- Confirm display with OK button.

The "Receive Telematics data" display appears.

- Confirm display with OK button.

Then the transmission vehicle data can be compared with the entries in the activation fax.

- Press the arrow buttons to scroll through this menu. The first menu level is reached by pressing the Back button.

The initialization is complete.