Interrogating the Fault Memory

Diagnostic Modes 01 - 09

Interrogating the Fault Memory

Procedure

- Connect the scan tool.

- Switch the ignition to the "ON" position.

- Select "Diagnostic Mode 03: Interrogating fault memory ".

- The stored DTC or DTC's will be displayed on the scan tool screen.

The following table is an example of the DTC information that may be displayed on the scan tool screen:





Refer to the following DTC tables for the diagnostic repair procedure:

• SAE P0xxxDTCs. => [ SAE P0xxx DTCs ] Testing and Inspection.

• SAE P1xxx-DTCs => [ SAE P1xxx DTCs ] Testing and Inspection.

• SAE P2xxxDTCs. => [ SAE P2xxx DTCs ] Testing and Inspection.

• SAE P3xxxDTCs. => [ SAE P3xxx DTCs ] Testing and Inspection.

• SAE U0xxxDTCs, => [ SAE U0xxx DTCs ] Testing and Inspection.

- Switch the ignition off.

- End of diagnosis.