Parking Aid Control Module

Parking Aid Control Module

Observe notes on contact corrosion. Refer to=> [ Contact Corrosion ] Service Precautions.

Removing





- If the control module was replaced, select the "Replace" function for the respective control module in "Guided Fault Finding" or " Guided Functions".

- Select the function or path:





- Follow further instructions on display of (VAS 5051B).

- Switch off ignition and remove ignition key.

- Remove left luggage compartment side trim cover - arrows -.

- Remove nuts - arrows -.





- Unplug connectors - 2 -.

- Remove Parking Aid Control Module (J446) - item 1 -.

Installing

Install in reverse order of removal, observing the following:

If the park assist control module (J446) was replaced, then it must be re-coded.

- Select the function or path:





- Follow further instructions on display of (VAS 5051B).