Exhaust Pipe Trim

Exhaust Pipe Trim

Removing






- Remove the rear bumper. Refer to => [ Rear Bumper ] Rear Bumper

- Remove the bolts - arrows -.

- Remove the exhaust pipe trim - 1 - inward from the bumper cover.

Installation






• For the correct tightening specifications, refer to => [ Rear Bumper Assembly Overview ] Rear Bumper Assembly Overview.

Install in reverse order of removal. Note the following:

- Check the distance of exhaust pipe trim - 2 - from bumper cover - 1 -:

• Dimension - x - = uniform gap.

- Install the rear bumper. Refer to => [ Rear Bumper ] Rear Bumper.