Power Front Seats

Entry Assistance Release Cables Adjusting, Coupe Only

Make sure the backrest is locked (zero position) or it could tip forward accidentally.

• Cover and upholstery removed, refer to => [ Backrest Cover and Upholstery ] Backrest Cover and Upholstery.

• Left and right release cables installed, refer to => [ Left and Right Release Cables, Coupe Only ] Left and Right Release Cables, Coupe Only

Pins (release pins) - 2 - are in locked position on both sides (delivery position, that means - lower basic position).






1 Release cable

- Bring lever - 1 - to a distance of a = 3 mm to edge of opening - arrow -.






- Adjust left and right release cables - 1 - and - 2 - at release cable adjusters - 4 -.






• Right release cable adjuster not shown in the illustration for overview purposes.

- To adjust, turn upper part - arrow A - and lower part - arrow B - of release cable adjuster - 4 - against each other.

- Adjust release cable adjuster - 4 - so release cable - 1 - is free of tension and release cable is loose.

• Proceed the same way with the release cable that is not pictured.

• When adjusting the release cable, do not pull on release pins - 2 -.






- After adjusting release cables, check function of backrest lock.

- When pressing lever - 1 -, backrest must be released when lever is at a distance of a = 9 mm to edge of opening.






- If it does not release or only releases partially, check release cable routing or repeat adjustment.