Left or Right Trim

Left or Right Trim

Special tools, testers and auxiliary items required

• Trim removal wedge (3409)






• Removal and installation of the left trim is described for a left 1/2 backrest. Removal and installation of the right trim is the same.

Removing






- Unclip right rear trim - 1 - starting at the bottom with Trim Removal Wedge (3409).

- Press release button - 2 - forward (in direction of travel) as far as stop and hold in this position.

- Pry trim - 1 - from release with Trim Removal Wedge (3409).

- Remove trim - 1 - toward rear.

Installation






Install in reverse order of removal. Note the following:

- First engage retaining tab - 4 - on trim - 3 - in opening - arrow - on release - 1 -.

- Press button - 2 - on release - 1 - forward (in direction of travel) as far as stop and hold in this position.

- Press trim down and engage with release.

- Make sure the all retaining tabs are engaged.

- Make sure the opening on cover is covered correctly and cover does not have any wrinkles in this area.