Diagram 1/27 (Tracks 351-364)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Instrument Cluster Control Module, Data Bus On Board Diagnostic Interface, Anti-Theft Immobilizer Control Module, Anti-Theft Immobilizer Reading Coil





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

D2 - Anti-Theft Immobilizer Reading Coil

E313 - Selector Lever

F189 - Tiptronic Switch Locations

J285 - Instrument Cluster Control Module Component Locations

J362 - Anti-Theft Immobilizer Control Module Ultrasonic Interior Monitoring Overview

J533 - Data Bus On Board Diagnostic Interface Component Locations

T10p - 10-Pin Connector, on Tiptronic switch

T20d - 20-Pin Connector, black, on data bus on board diagnostic interface

T32 - 32-Pin Connector, blue, on instrument cluster control module

Y24 - Display Unit in Instrument Cluster

(B415) - Infotainment CAN-Bus High Connection 1 (in main wiring harness)

(B421) - Infotainment CAN-Bus Low Connection 1 (in main wiring harness)

^ - CAN-Bus (data wire)

* - Models with direct shift gearbox 02E

Previous Diagram 1/26 (Tracks 337-350)

Next Diagram 1/28 (Tracks 365-378)