Diagram 1/28 (Tracks 365-378)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Instrument Cluster Control Module, Diagnostic Socket, Radio Frequency Controlled Clock Receiver, Radio Frequency Controlled Clock





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J285 - Instrument Cluster Control Module Component Locations

J489 - Radio Frequency Controlled Clock Receiver

J623 - Engine Control Module (ECM) Component Locations

J743 - Direct Shift Gearbox (DSG) Mechatronic 6-Speed DSG Transmission 02E Overview

T16 - 16-Pin Connector, Diagnostic Connector

T20e - 20-Pin Connector, on Direct Shift Gearbox (DSG) Mechatronic

T32 - 32-Pin Connector, blue, on instrument cluster control module

Y8 - Radio Frequency Controlled Clock

Y24 - Display Unit in Instrument Cluster

(393) - Ground Connection 28 (in main wiring harness)

(662) - Ground Connection (on left rear side panel) Locations

(B444) - OBD Connection 1 (in main wiring harness)

^ - CAN-Bus (data wire)

* - => Wiring Diagram engine

Previous Diagram 1/27 (Tracks 351-364)

Next Diagram 1/29 (Tracks 379-392)