Cylinder Block Assembly: Specifications

Fastener Tightening Specifications






Accessory Assembly Bracket Tightening Sequence






- Mount the accessory assembly bracket and then mount the bolts - 4 -.

- Tighten bolts in 3 stages in - 1 to 5 - sequence as follows:






Crankshaft, Tightening Sequence






- Tighten the crankshaft bolts in sequence - 1 to 5 -.

- Tighten the bolts - 1 through 10 - and - arrows - hand-tight.

- Tighten the bolts - 1 through 10 - to 65 Nm.

- Tighten the bolts - 1 through 10 - 90° further using a rigid wrench.

- Tighten the bolts - arrows - to 20 Nm.

- Tighten the bolts - arrows - 90° further using a rigid wrench.