Diagram 7/3 (Tracks 15-28)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Climatronic Control Module, Fresh Air Blower Control Module, Fresh Air Blower





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E230 - Heated Rear Window Button

J126 - Fresh Air Blower Control Module A/C Unit Components

J255 - Climatronic Control Module Components Inside Pass Compartment

J519 - Vehicle Electrical System Control Module Component Locations

J533 - Data Bus On Board Diagnostic Interface Component Locations

SB8 - Fuse 8 (on fuse panel B) Locations

SB9 - Fuse 9 (on fuse panel B) Locations

SB12 - Fuse 12 (on fuse panel B) Locations

T10l - 10-Pin Connector, black, behind instrument panel, right

T12e - 12-Pin Connector, black (Connector G), on vehicle electrical system control module

T16c - 16-Pin Connector, brown (Connector C), on Climatronic control module

T20d - 20-Pin Connector, black, on data bus on board diagnostic interface

T20k - 20-Pin Connector (Connector B), on Climatronic control module

V2 - Fresh Air Blower A/C Unit Components

(43) - Ground Connection (on right lower A-pillar) Locations

(B272) - Plus Connection (30) (in main wiring harness)

(B397) - Comfort System CAN-Bus High Connection 1 (in main wiring harness)

(B398) - Comfort System CAN-Bus High Connection 2 (in main wiring harness)

(B406) - Comfort System CAN-Bus Low Connection 1 (in main wiring harness)

(B407) - Comfort System CAN-Bus Low Connection 2 (in main wiring harness)

^ - CAN-Bus (data wire)

* - A/C Control Head

** - Operation for heated rear window via CAN-Bus, heated rear window see Wiring Diagrams Standard Equipment

Previous Diagram 7/2 (Tracks 1-14)

Next Diagram 7/4 (Tracks 29-42)