Rear Fog Lamp

Rear Fog Lamp

Observe notes on contact corrosion. Refer to => [ Contact Corrosion ] Service Precautions.

Removing






- Remove rear bumper cover. Refer to Removal and Installation.

- Disconnect electrical connector - 2 -.

- Remove the screws - arrows - and remove the rear fog lamps - 1 -.

Installing

• Tightening specification, refer to => [ Fog Lamp, Center High-Mounted Brake Light, License Plate Lamps Overview ] Fog Lamp, Center High-Mounted Brake Light, License Plate Lamps Overview.

Install in reverse order of removal. Note the following:

- Install the cover on the rear bumper. Refer to Removal and Installation.