Passive Occupant Detection System (PODS) (USA Only), Assembly Overview

Passive Occupant Detection System (PODS) (USA Only), Assembly Overview

CAUTION:
The replacement part (service kit) for the Passive Occupant Detection System (PODS) (USA only) is already precalibrated and must not be separated under any circumstances. The service kit consists of:
- Seat Occupied Recognition Control Module J706
- Seat Occupied Recognition Pressure Sensor G452
- Seat Occupied Recognition Mat
- Seat cushion
- Wiring harness between Seat Occupied Recognition Control Module J706 and Seat Occupied Recognition Pressure Sensor G452.







1 - Seat Occupied Recognition Control Module J706
- Must not be disconnected and replaced separately under any circumstances
- Replacing is only possible with the entire service kit

2 - Screw
- 2.5 Nm
- Qty.2

3 - Connector on Seat Occupied Recognition Control Module J706
- Must not be separated under any circumstances.

4 - Seat Occupied Recognition Pressure Sensor G452
- Must not be disconnected and replaced separately under any circumstances
- Replacing is only possible with the entire service kit

5 - Pressure hose
6 - Connector between service kit and seat wiring harness
7 - Connector on Seat Occupied Recognition Pressure Sensor G452
- Must not be separated under any circumstances.

8 - Guide clip
9 - Retaining bracket