Trim With Entry Assistance Handle, Coupe Only Through 10.06

Trim with Entry Assistance Handle, Coupe Only through 10.06

• The trim with the handle can be removed and installed with the front seat installed.

• The trim and handle are both destroyed during removal.

Removing






- Destroy trim - 1 - and connecting piece - 3 - for handle - 2 -.

- Do not damage cover when doing so.

- Make sure the no plastic pieces fall into cover or between upholstery and entry assistance bracket.

- Remove destroyed trim - 1 - with entry assistance handle - 2 - from front seat.

Installation






- Slide new handle - 3 - onto lever - 4 - as far as stop.

- At the same time, clip trim - 2 - with bracket - 1 - on backrest frame.

- Make sure the trim - 2 - cleanly covers the cover opening.

- Check function of the entry assistance handle.