Diagram 3/11 (Tracks 127-140)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Heated Oxygen Sensor (HO2S), Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC), Oxygen Sensor (O2S) Heater, Oxygen Sensor (O2S) Heater 1 (behind Three Way Catalytic Converter (TWC), Fuses





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G39 - Heated Oxygen Sensor (HO2S) Locations

G130 - Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC) Locations

J623 - Engine Control Module (ECM) Component Locations

SB1 - Fuse 1 (on fuse panel B) Locations

SB2 - Fuse 2 (on fuse panel B) Locations

SB3 - Fuse 3 (on fuse panel B) Locations

SB4 - Fuse 4 (on fuse panel B) Locations

T4b - 4-Pin Connector, black, on oxygen sensor (O2S) behind three way catalytic converter (TWC)

T6c - 6-Pin Connector, black, on heated oxygen sensor (HO2S)

T81 - 81-Pin Connector, black, on engine control module (ECM)

Z19 - Oxygen Sensor (O2S) Heater

Z29 - Oxygen Sensor (O2S) Heater 1 (behind Three Way Catalytic Converter (TWC)

(B275) - Plus Connection (87) (in main wiring harness)

Previous Diagram 3/10 (Tracks 113-126)

Next Diagram 3/12 (Tracks 141-154)