Diagram 3/21 (Tracks 267-280)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Instrument Cluster Control Module, Oil Level Thermal Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G266 - Oil Level Thermal Sensor Engine Management System

J285 - Instrument Cluster Control Module Component Locations

J533 - Data Bus On Board Diagnostic Interface Component Locations

SC1 - Fuse 1 (on fuse panel C)

SC4 - Fuse 4 (on fuse panel C)

T6a - 6-Pin Connector, black, in engine compartment, front left

T20d - 20-Pin Connector, black, on data bus on board diagnostic interface

T32 - 32-Pin Connector, blue, on instrument cluster control module

Y24 - Display Unit in Instrument Cluster

(B278) - Plus Connection 2 (15a) (in main wiring harness)

^ - CAN-Bus (data wire)

Previous Diagram 3/20 (Tracks 253-266)