LuK Clutch

LuK Clutch

Bolts
M6 13Nm
M7 20Nm

Install the pressure plate as follows so that the pressure plate does not distort during installation (causing shuddering during acceleration):

- Install all 6 bolts evenly, by hand, until the bolt heads contact the pressure plate.

- Tighten all 6 bolts clockwise, one after the other and in steps of 90° (1/4 turn) until the housing contacts the flywheel.

- Tighten all 6 bolts clockwise, one after the other to tightening specification. Tightening specification - 4 - => [ Bolt ] LuK Clutch Assembly Overview.