Sachs Clutch

Sachs Clutch






Bolts
M6 13Nm
M7 20Nm

- Install all 6 bolts evenly, by hand, until the bolt heads contact the pressure plate.

- Tighten all 6 bolts clockwise, one after the other and in steps of 90° (1/4 turn) until the housing contacts the flywheel.

• When doing this, the stop pin - arrow - must lift off from the pressure plate.

- Tighten all 6 bolts clockwise, one after the other to tightening specification. Tightening specification - 4 - => [ Bolt ] Sachs Clutch Assembly Overview.