Shift Knob and Covers Assembly Overview

Shift Knob and Covers Assembly Overview






1 Shift Knob with Shift Lever Boot

• Cannot be separated from each other

• Replace together

• Removing and installing, refer to => [ Shift Knob with Shift Lever Boot ] Shift Knob With Shift Lever Boot

• Disconnecting from center console cover

• Disconnecting from mounting frame

2 Clamp

• To secure shift knob on shift lever

• Securing with hose clip pliers (V.A.G 1275)

3 Center Console Trim

• Removing and installing together with shift knob, refer to => [ Shift Knob with Shift Lever Boot ] Shift Knob With Shift Lever Boot

• Disconnecting from shift lever boot

4 Mounting Frame

• Disconnecting from center console

• Disconnecting from shift lever boot

5 Washer

• Quantity: 4

6 Bolt

• 1.5 Nm

• Quantity: 4

7 Noise Insulation Plate

8 Noise Insulation

9 Selector Lever

• Adjusting selector mechanism, refer to => [ Shift Mechanism, Adjusting ] Adjustments

Disconnect the Center Console Trim and Mounting Frame for the Shift Lever Boot

- Remove bolts - arrows -.





- Trim and mounting frame, disconnecting

Mounting Frame and Shift Lever Boot, Disconnecting

- Carefully release tabs - arrows - and remove mounting frame - 1 - from shift lever boot - 2 -.