Rear Bumper Bracket

Rear Bumper Bracket

Removing






- Remove bumper. Refer to => [ Rear Bumper ] Rear Bumper.

- Remove the nut - 2 -.

- Remove bumper bracket - 1 - from the body.

Installation

• For the correct tightening specifications, refer to => [ Impact Member, Shock Absorber and Guide Piece Assembly Overview ] Impact Member, Shock Absorber and Guide Piece Assembly Overview.

Install in reverse order of removal. Note the following:

• The threaded pin - arrow - is only used for fastening the bracket.

- Install the bumper. Refer to => [ Rear Bumper ] Rear Bumper.