Hood - TT, Hood, Adjusting

Hood, Adjusting

Special tools, testers and auxiliary items required

• Adjusting Gauge (3371)

Gap Dimensions for Hood






• In - A - area = 3.5 mm +/- 0.5 mm.

• In - B - area = 4.5 mm +/- 0.5 mm

• In - C - area = 4.5 mm +/- 0.5 mm

• In - D - area = 4.0 mm to 2.5 mm (in transition area)

• In - E - area = 3.5 mm +/- 0.5 mm

• In - F - area = 3.5 mm +/- 0.5 mm

Buffer Stop for Height Adjustment





• Adjusting buffer - 1 - must lightly contact the lock carrier when the lid is closed.

• Rubber buffers - 2 - act as a strike guard and should not make contact with the lid closed.

• The adjusting buffers are used to adjust the height of the lid.

Hood Projection






- For correct adjustment, lid - 1 - must project in the headlamp area - 2 -.

• Dimension - a -= 3.5 mm +/- 0.5 mm

• Projection dimension - b - = 3 mm +/- 0.5 mm