Exhaust System, Aligning

Exhaust System, Aligning

• Align exhaust system when cold.

• For the correct tightening specifications, refer to => [ Exhaust System Overview ] Removal and Replacement

- Loosen front double clamping bolts => [ (Item 3) Clamping Sleeve ] Removal and Replacement.






- Press rear muffler forward - arrow - until pretension at left retaining loop - a - = 11 to 13 mm.

- Install clamping sleeve in angled position shown.






• Threaded connections point toward the right.

• Nuts face up.

• alpha = approximately 20°

- Tighten clamping sleeve threaded connections evenly.

Aligning Tailpipe:

- Align tailpipes so that the clearance - a - on the left is the same as the clearance - a - on the right.






- At the same time, the clearance - b - from the bumper cut-out to the tailpipes must be achieved.

• Dimension b = min. 21 mm

- If necessary, loosen the suspended mountings of the rear muffler to align the tailpipes.