Inner Guide Piece

Inner Guide Piece

Removing






- Remove bumper. Refer to => [ Rear Bumper ] Rear Bumper.

- Remove Radio frequency controlled clock receiver (J489) - 1 - if applicable.

- Remove the bolts - arrows -.

- Remove inner guide piece - 2 -.

Installation






• For the correct tightening specifications, refer to => [ Tightening Torque and Sequence for Inner Guide Piece ] Impact Member, Shock Absorber and Guide Piece Assembly Overview.

Install in reverse order of removal. Note the following:

- Tighten the screws in the sequence - 1-3 -.

- Install the bumper. Refer to => [ Rear Bumper ] Rear Bumper.