Rear Wheel Housing Liner

Rear Wheel Housing Liner






1 Rear Wheel Housing Liner

• Rear wheel removed.

• Removing

- Vehicles without an expanding clip: remove nuts => [ (Item 2) Nut ] and bolts => [ (Item 3) Screws ].

- Vehicles with an expanding clip => [ Rear Wheel Housing Liner with Expanding Clip ]

- Remove wheel housing liner downward.

• Installation: in reverse order.

2 Nut

• 2 Nm

3 Screws

• 1.5 Nm

4 Side panel

5 Expanding nut

• Pressed into side panel.

Rear Wheel Housing Liner with Expanding Clip





- Remove the screws - arrows - from the wheel housing liner and remove expanding clip - 3 -.

- To remove the expanding clip, press in clamping pin - 1 - carefully by dimension - x - until it audibly engages in the expanding clip - arrow A -.

• Dimension - x - = 5 mm

- Pull out unlocked expanding clip - 2 - with the clamping pin.