Adhesive Tape Surfaces

Adhesive Tape Surfaces

• The vehicle must be at room temperature before the installation of self-adhesive cover, door seal molding, etc. when using adhesive tape.

• The adhesive surfaces on the body must be free of dirt and grease.

• Clean the adhesive surfaces using cleaning solution (D 009 401 04).

• Warm the adhesive areas to approximately 104 °F (40 °C) using a hot air gun.

• After installing the covers with adhesive tape, use a roller and press the adhesive tape one more time to make sure it is on securely.

• After that, pull on the adhesive tape by hand just to make sure it is on.