Cylinder Head Assembly

Cylinder Head Tightening Sequence





Replace the cylinder head bolts
Tighten the cylinder head bolts in sequence - 1 to 5 -.
Tighten 40 Nm
Tighten further 90°
Tighten further 90°
Tighten the bolts - arrows - 8 Nm
Tighten the bolts - arrows - 90° further


Maximum permissible distortion 0.05 mm

Cylinder Head Cover Tightening Sequence





- Replace bolts

- Hand-tighten bolts in several stages in sequence - 1 to 6 -.

- Tighten the bolts in a sequence - 1 to 6 - to 8 Nm using a torque wrench.

- Tighten the bolts an additional 90° using a rigid wrench in sequence - 1 to 6 -.

• Ensure guide frame is not tilted.


Turbocharger Specifications

Intake Manifold Specifications