Telephone Transceiver

Telephone Transceiver

- If control module is replaced, select "Replacement" function for appropriate control module in "Guided Fault-Finding" routine using the Vehicle Diagnosis, Testing and Information System (VAS 5051).

- Switch off all electrical consumers.

- Remove the key.

Removing

- Remove left front seat.

- Fold back the floor mat.

- Unclip cover - 1 - on electronics box - 2 - and remove it upward.





- Open the locking mechanism on the electronics box in - direction of arrow -.

- Remove Bluetooth Antenna (R152) - 3 - from Telephone Transceiver (R36) - 4 -.

- Remove the telephone transceiver - 1 - from the electronics box - 3 - and disconnect the connector - 2 -.





Installing

- Install in reverse order of removal.