Impact Member With Trailer Hitch

Impact Member with Trailer Hitch

Removing

- Remove the rear bumper cover. Refer to => [ Rear Bumper Cover ] Rear Bumper Cover.

- Remove the trailer hitch socket - 2 - from the trailer hitch.






- Remove the bolts - arrows -.

- Remove the impact bar - 1 -.

Installing

• For the correct tightening specifications => [ Rear Impact Member, Lateral Guide, Rear Guide ] Rear Bumper Cover Overview.

Installation is reverse of removal, but note the following:

- Install the trailer hitch socket.

- Install the rear bumper cover. Refer to => [ Rear Bumper Cover ] Rear Bumper Cover.