Mount with Cigarette Lighter and Cover

Mount with Cigarette Lighter and Cover

Removing





- Switch off all electrical components.

- Remove ignition key.

- Remove the Function Selector Switch II (E272) - 6 -.

- Remove center console. Refer to => [ Center Console ] Center Console.

- Disconnect electrical connector on cigarette lighter.

- Rotate center console.

- Unclip connector - 4 - from U-shaped clip.

- Remove the bolts - 5 -.

- Remove mount with cigarette lighter and cover - 3 - from center console - 1 -.

Installation

Installation is reverse of removal, but note the following:

- Connect the connector - 4 - opposite the drive direction.

- Secure connector - 4 - in center console with U-shaped clip - 2 -.

Tightening Specifications