Mirror Glass

Mirror Glass

Special tools, testers and auxiliary items required

• Pry Lever - Rmv Outside Mirror (80-200)

• Protective gloves

Removing


Injury risk.

• Wear protective gloves.

• Cover the area around the mirror housing with a soft cloth to protect the paint.

- Press the mirror glass - 1 - from the mirror adjusting unit using the (80 - 200) - arrow -.






- Disconnect the heated mirror electrical connectors - 2 - and - 3 - on the rear side of the mirror glass - 1 -.






- Unclip the electrical connector - 5 - from the bracket, if applicable.

- Disconnect electrical harness connector - 4 -.

Installing

Installation is reverse of removal, but note the following:

- Position the mirror glass on the mirror adjusting unit and press it on.

• Only press the center of the mirror glass when pressing it on.