Diagram 95/7 (Tracks 71-84)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. How to Read Track Diagrams


Powertrain CAN-Bus, Diagnostic Connector





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J... - Engine Control Modules (ECM)

J587 - Selector Lever Sensor Control Module

J743 - Direct Shift Gearbox (DSG) Mechatronic Control Modules in Front Part Of Vehicle

T16 - 16-Pin Connector, black, instrument panel driver's side, bottom left (diagnostic connector)

T25 - 25-Pin Connector, black (Connector A)

(390) - Ground Connection 25 (in main wiring harness)

(B383) - Powertrain CAN-Bus High Connection 1 (in main wiring harness)

(B390) - Powertrain CAN-Bus Low Connection 1 (in main wiring harness)

(B444) - OBD Connection 1 (in main wiring harness)

* - => Applicable Wiring Diagram Engine

** - Only models with data link connector

Previous Diagram 95/6 (Tracks 57-70)

Next Diagram 95/8 (Tracks 85-98)