Diagram 65/16 (Tracks 197-210)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. How to Read Track Diagrams


Throttle Position (TP) Sensor, Camshaft Position (CMP) Sensor, Fuel Pressure Sensor, Secondary Air Injection (AIR) Sensor 1





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G40 - Camshaft Position (CMP) Sensor Locations Camshaft Position Sensor -G40-

G79 - Throttle Position (TP) Sensor Locations [1][2]Accelerator Pedal Position Sensor

G185 - Accelerator Pedal Position Sensor 2 Locations [1][2]Accelerator Pedal Position Sensor

G247 - Fuel Pressure Sensor Locations Fuel Pressure Sensor -G247-

G609 - Secondary Air Injection (AIR) Sensor 1 Locations [1][2]Air Injection Flow Sensor

J623 - Engine Control Module (ECM) Control Modules in Front Part Of Vehicle

T6k - 6-Pin Connector, black, near throttle position (TP) sensor

T6s - 6-Pin Connector, black, behind intake manifold

T60 - 60-Pin Connector, black (Connector A)

T94 - 94-Pin Connector, black (Connector B)

(200) - Ground Connection (shielding) (in engine compartment wiring harness)

(220) - Sensor Ground Connection (in engine wiring harness)

(B537) - Connection 28 (in main wiring harness)

(D141) - Connection (5V) (in engine pre-wiring wiring harness)

Previous Diagram 65/15 (Tracks 183-196)

Next Diagram 65/17 (Tracks 211-224)