Rear Bumper Bolt Points

Rear Bumper Bolt Points






1 - Bumper Cover

2 - Cap Nuts

• To screw in and screw out cap nuts, use (T40078).

• 4 Nm

3 - Guide Piece

• Two-piece version

4 - Metal Screw

• 1.5 Nm

5 - Rear Wheel Housing Liner

6 - Metal Screw

• 1.5 Nm

7 - Spoiler Bracket

Rear Guide Piece, Front Section





- When installing front section - 1 -, tighten bolts in the sequence - 2 -, - 3 -, - 4 - and - 5 -.

- Clips - 6 - inserted in body.

• If the wheel housing liner has threaded bolts, then be sure to replace the bolt with nut that has the same tightening specification.

Rear Guide Piece, Rear Section





- When installing rear section - 2 -, tighten bolts in the sequence - 3 -, - 5 - and - 4 -.

- Clips - 1 - inserted in body.