Fender

Fender

Removing

- Remove the front bumper cover. Refer to => [ Front Bumper ] Front Bumper.

- Remove end plate. Refer to => [ End Plate ] End Plate.

- Remove the front bumper cover mount. Refer to => [ Front Bumper ] Front Bumper.

- Remove sill panel trim for fender. Refer to => [ Fender ] Fender.

- Remove bolts - 1, 2 and 3 -.






- Remove bolts - 2, 3 - and nuts - 4 -.






- Remove the fender - 1 -.

Installing

• For the correct tightening specifications, refer to => [ Fender Overview ] Fender Overview.

Installation is reverse of removal, but note the following:

- The front and back section of the cover must be located between the fender flange and the fender.

- Install the front bumper cover mount. Refer to => [ Front Bumper ] Front Bumper.

- Install the end plate. Refer to => [ End Plate ] End Plate.