Seat Height Adjustment Unit

Seat Height Adjustment Unit


• Follow the safety precautions for pyrotechnic components.

• Before handling pyrotechnical components (for example, connecting electrical connector), the person handling them must "discharge static electricity". For example, by briefly touching the door striker pin.





1 Retaining Clip

2 Seat Height Adjustment Handle Lever

3 Seat Height Adjustment Unit

Removing

- Remove the seat. Refer to => [ Seat ] Seat.

- Secure the seat on the (VAS 6136). Refer to => [ Front Seat, Installing on VAS 6136 ] Front Seat, Installing on VAS 6136.

- Remove backrest and front seat pan. Refer to => [ Front Backrest and Seat Pan ] Front Backrest and Seat Pan.

- Remove nut - 5 -.

- Remove bolts - 7 - (quantity: 2).

- Remove the bolt - 4 -.

- Remove seat height adjustment unit - 3 - and retaining plate - 6 -.

Installation

Installation is reverse of removal, but note the following:

- Make sure the retaining plate - 6 - makes contact on backrest frame at - position of arrow -.

4 Bolt

• Tightening specification 8 Nm

5 Nut

• Tightening specification 12 Nm

6 Retaining Plate

7 Screws

Quantity: 2

• Tightening specification 8 Nm