Diagram 60/13 (Tracks 155-168)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. How to Read Track Diagrams


Knock Sensor (KS), Engine Speed (RPM) Sensor, Camshaft Position (CMP) Sensor, Accelerator Pedal Position Sensor, Fuel Pressure Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G28 - Engine Speed (RPM) Sensor Locations [1][2]Diagrams

G40 - Camshaft Position (CMP) Sensor Locations Camshaft Position Sensor -G40-

G61 - Knock Sensor (KS) 1 Locations Knock Sensor 1 -G61-

G79 - Throttle Position (TP) Sensor Locations [1][2]Accelerator Pedal Position Sensor

G185 - Accelerator Pedal Position Sensor 2 Locations [1][2]Accelerator Pedal Position Sensor

G247 - Fuel Pressure Sensor Locations Fuel Pressure Sensor -G247-

J623 - Engine Control Module (ECM) Control Modules in Front Part Of Vehicle

T3q - 3-Pin Connector, green, in left engine compartment (knock sensor)

T6k - 6-Pin Connector, black, near throttle position (TP) sensor

T6s - 6-Pin Connector, black, behind intake manifold

T60 - 60-Pin Connector, black (Connector A)

T94 - 94-Pin Connector, black (Connector B)

(200) - Ground Connection (shielding) (in engine compartment wiring harness)

(220) - Sensor Ground Connection (in engine wiring harness)

(B537) - Connection 28 (in main wiring harness)

(D141) - Connection (5V) (in engine pre-wiring wiring harness)

Previous Diagram 60/12 (Tracks 141-154)

Next Diagram 60/14 (Tracks 169-182)