Diagram 126/43 (Tracks 575-588)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. How to Read Track Diagrams


Voltage stabilizer





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J532 - Voltage stabilizer Control Modules in Interior Of Vehicle

SB1 - Fuse 1 (on fuse panel B) Overview Of Fuses

SB3 - Fuse 3 (on fuse panel B) Overview Of Fuses

SC8 - Fuse 8 (on fuse panel C) Overview Of Fuses

SB29 - Fuse 29 (on fuse panel B) Overview Of Fuses

SC32 - Fuse 32 (on fuse panel C) Overview Of Fuses

SC40 - Fuse 40 (on fuse panel C) Overview Of Fuses

SC41 - Fuse 41 (on fuse panel C) Overview Of Fuses

SB53 - Fuse 53 (on fuse panel B) Overview Of Fuses

T12x - 12-pin connector

T40 - 40-pin connector

(53) - Ground connection in rear lid, right Overview Of Ground Connections in Rear Part Of Vehicle (3-door Models)

(62) - Ground connection on right C-pillar Overview Of Ground Connections in Rear Part Of Vehicle (3-door Models)

(B273) - Positive connection (15) (in main wiring harness)

(B300) - Positive connection 4 (30) (in main wiring harness)

(B306) - Positive connection 10 (30) (in main wiring harness)

* - E-Box high

*2 - E-Box low

*3 - Only for vehicles without Start/Stop system

*4 - Only for vehicles with Start/Stop system

*5 - Only for vehicles with Japan equipment

*6 - Refer to applicable wiring diagram for battery in engine compartment

Previous Diagram 126/42 (Tracks 561-574)

Next Diagram 126/44 (Tracks 589-602)