Fresh Air Blower Control Module (J126) and Fresh Air Blower (V2)

Fresh Air Blower Control Module (J126) and Fresh Air Blower (V2)

Vehicles with automatically regulated A/C system

• Vehicles with manually regulated A/C system, a Fresh Air Blower Series Resistor With Fuse (N24) is installed in place of the Fresh Air Blower Control Module (J126) , removing and installing Fresh Air Blower Series Resistor With Fuse (N24)=> [ Fresh Air Blower Series Resistor with Fuse (N24) ] Service and Repair.

• Note that there are different versions of fresh air blower for vehicles without A/C (only with heater), with a manual or automatic climate control system. Refer to the Electronic Parts Catalog. Removing and installing fresh air blower on vehicles with a manual climate control system, refer to => [ Fresh Air Blower (V2) ] Service and Repair.

• Up to model year 2007, heating & A/C units were installed on which the Fresh Air Blower Control Module and the Fresh Air Blower were cast with each other in the housing and could not be replaced separately. As of model year 2007, heating & A/C units were introduced on which the Fresh Air Blower Control Module and the Fresh Air Blower can be replaced separately. Refer to=> [ Fresh Air Blower Control Module (J126) ] Fresh Air Blower Control Module (J126) and Electronic Parts Catalog.

• Fresh air blower control module and fresh air blower, removing and installing, refer to=> [ Fresh Air Blower (V2) and Control Module (J126) ] Fresh Air Blower (V2) and Control Module (J126).

• Fresh air blower control module, removing and installing, refer to=> [ Fresh Air Blower Control Module (J126) ] Fresh Air Blower Control Module (J126).