Battery In Luggage Compartment, Disconnecting and Connecting

Battery in Luggage Compartment, Disconnecting and Connecting

Disconnecting






- Switch off ignition and remove ignition key.

- Remove the rear molded insert - 3 - which holds the vehicle tools located under the luggage compartment floor.

- Unhook the retaining strap - 2 - and remove the front molded insert - 1 -.

- Open the flap above the main fuse box in the luggage compartment.






- Remove the nut and disconnect the ground cable form the threaded pin.

- To prevent the ground cable from coming in contact with the body and short circuiting, cover the end of the ground cable with tape.

Connecting

- Connect the ground cable eye to the threaded pin and tighten the nut.

When connecting the battery, perform the following steps:

• Follow the steps before starting the engine. Refer to owner's manual.

• Activate the power window regulator one-touch up/down function. Refer to owner's manual.

• Synchronizing the remote control. Refer to owner's manual.

• Check the DTC memories of all the control units and erase Undervoltage fault if necessary.

• After connecting the power supply, the ABS warning lamp may only go out after the vehicle has been driven a few yards.

Tightening Specifications