Gears, Shafts

Fastener Tightening Specifications






Oil Pan - Tightening Specification and Sequence

- Tighten the bolts - arrows - diagonally in steps to 16 Nm.






DSG Transmission Mechatronic (J743) - Tightening Specification and Sequence






• Replace bolts that are tightened to the specification.

- Tighten the bolts in four steps in the sequence shown:






Transmission Oil Pump - Tightening Specification and Sequence

• Replace bolts that are tightened to the specification.

- Tighten bolts - arrows - (different bolts depending on version):






Countersunk bolts - A -:

- Tighten countersunk bolts to 8 Nm diagonally.

Flat head bolts - B -:

- Tighten flat head bolts in 2 stages as follows:






Transmission Oil Pump Cover - A - - Tightening Specification and Sequence






• Replace the cover bolts for transmission fluid pump.

- Tighten the bolts - arrows - diagonally in steps to 8 Nm.

Transmission Input Speed Sensor (G182) / Clutch Oil Temperature Sensor (G509)






A Transmission input speed sensor (G182) / clutch oil temperature sensor (G509)
B Bolt - 10 Nm
C Electrical connection