Selector Mechanism, Checking Connectors, Through 11.2009

Selector Mechanism, Checking Connectors, through 11.2009

Before maintenance or checking the connections, the cause of the damage should be determined through the Guided Fault Finding vehicle diagnostic tester.

Before inspection of the connections, all control devices in the vehicle should be checked for entries on their event log, if applicable, errors should be repaired vehicle diagnostic tester.

- Checking the connections.






A 10-pin connector for connecting wires from the selector mechanism to the transmission (with CAN bus lines)
B 4-pin connector to shift lock solenoid (N110) and selector lever park position lock switch (F319)
C 10-pin connector for selector mechanism cover