Upper A-Pillar Trim

Upper A-pillar Trim





1 - Upper A-pillar trim

• Removing

- Remove the wind protection trim. Refer to => [ Wind Deflector Trim ] Wind Deflector Trim.

- Remover the lower A-pillar trim at the top.

- Pry off the upper A-pillar trim - 1 - at the clips - 2 - (Qty. 2).

- Remove the upper A-pillar trim - 1 -.

• Removing

- When installing, make sure the rubber door seal is clean and is pulled over the top of the A-pillar trim - 1 -.

- Install the upper A-pillar trim - 1 - in reverse order of removal.

2 - Clips (Qty. 3)